Pabx Trace Log - Siemens HiPath 1100 User Manual

Miscellaneous functions
Step by step
*177
#177
*178
#178
126

PABX Trace log

PABX Trace is a tool used to monitor the events that
have occurred in the PABX during a certain period.
These events are defined while the system is being pro-
grammed using the programming code (code 246) or
using HiPath 1100 Manager.
This information can be downloaded using the HiPath
1100 Manager so that the support technician can check
the system.
Start/Stop PABX Trace log
The information will be saved in a volatile memory.
Enter the code to enable the trace.
or
Enter the code to deactivate the trace.
After switching off or updating data, you do not
need to reconfigure the trace, although only the
configuration and the status will be saved. The
data will be lost when any of these events occur.
Activating/deactivating extended Trace log
The information will be saved in a non-volatile memory.
Enter the code to enable the extended trace.
or
Enter the code to deactivate the extended trace.