Direct Communication Call - Siemens HiPath 1100 User Manual

Step by step
*80=SPEAKER CALL?
*80

Direct communication call

This features activates sending voice messages to sys-
tem telephones using the speakerphone). A message
can be sent to an extension or a Call group (CG).
When a message is sent, the called party hears a warn-
ing signal before the message is played and the display
shows the caller's name and number.
Required: Destination number uses a Profiset 3030 or
a telephone using the speakerphone.
N
Press this key.
Select and confirm.
or
Enter the code for direct messaging.
j
Enter an extension or Call group (CG) (for example: 11/
101 or 770).
[
Record the message.
Answer the call
^
Lift the handset.
or
n
Press this key. The LED comes on.
[
Start conversation.
Functions used when making calls
39