Changing Ignored Status Messages; Changing The Menu Title - Emerson 375 User Manual

HART Functionality
Changing
Ignored Status
Messages
Changing the
Menu Title
The 375 Field Communicator displays status messages
from the connected HART device. The Ignore Status
option lets you specify the number of field device status
messages that are ignored, extending the time between
displayed messages. The default is 50 messages. If you
choose to ignore all field device status messages, every
message from nuisance to critical will be ignored.
To change the number of ignored status messages:
1. From the HART Application main menu, double-tap
Utility.
2. Double-tap Configure HART Application.
3. Double-tap Ignore Status.
4. Enter the number of status messages you want
ignored before the next message is displayed. You
can specify a number from 50 to 500.
5. Tap ENTER. All field device status messages are
ignored until the quantity specified has been reached.
The HART 6 Tag menu lets you choose if the HART
short or long tag is displayed in the menu title for HART
revision 6 devices. The short tag can have up to 8
characters, and the long tag can have up to 32
characters. These tags can be edited at any time. If the
long tag does not fit on the screen, an ellipsis is shown at
the end of the tag. The location of these parameters in
the Online menu varies because it is determined by the
device manufacturer.
To select a HART tag for the menu title:
1. From the HART Application main menu, double-tap
Utility.
2. Double-tap Configure HART Application.
3. Double-tap HART 6 Tag.
4. Select Show Long Tag to display the HART long tag,
or select Show Short Tag to display the HART short
tag.
5. Tap ENTER.The 375 Field Communicator continues
to use the option you selected until you change the
setting.
3-19