3-20
Changing ignored status messages
The 375 Field Communicator displays status
messages from all connected HART devices. The
Ignore Status option lets you specify the number of
field device status messages that are ignored,
extending the time between displayed messages.
The default is 50 messages. If you choose to
ignore all field device status messages, every
message from nuisance to critical will be ignored.
To change the number of ignored status
messages:
1. From the HART main menu, double-tap Utility.
2. Double-tap Configure HART Application.
3. Double-tap Ignore Status.
4. Enter the number of status messages you want
ignored before the next message is displayed.
You can specify a number from 50 to 500.
5. Tap ENTER. All field device status messages
will be ignored until the quantity specified has
been reached.
Storage Cleanup
The Storage Cleanup menu lets you delete the
following items:
• Internal Flash - By selecting YES you will
remove all configurations saved in the Internal
Flash.
• Configuration Expansion Module - By
selecting YES you will remove all configurations
saved in the Configuration Expansion Module.
• Hot Key Menu - By selecting YES you will
delete all items from the Hot Key menu.
HART Functionality