Emerson 375 User Manual page 32

2-22
NOTE
The instructions in this manual are written for using the
IrDA connection, not the card reader.
Listen For PC
In Listen For PC mode, the 375 Field Communicator is
under the control of a PC application for transferring data
and managing device configurations. The PC application
could be one of the following:
• AMS Suite: Intelligent Device Manager (version 6.2 or
higher), software for managing devices and valves in
a process plant. Currently, AMS Device Manager
supports HART configurations only.
• 375 Easy Upgrade Programming Utility.
NOTE
The On/Off key, and the stand-by and auto-off timers are
disabled when the 375 Field Communicator is in Listen
For PC mode.
The 375 Field Communicator must be in Listen For PC
mode when communicating through IrDA.
To enter Listen For PC:
1. From the 375 Main Menu, select Listen For PC.
2. Align the 375 Field Communicator IrDA interface with
the PC IrDA interface or an IrDA adapter.
3. Complete the necessary transfers using the Easy
Upgrade Programming Utility or AMS Device
Manager. See the Easy Upgrade Programming Utility
online Help for more information.
4. Tap EXIT to close the Listen For PC screen.
If new system software was downloaded to the 375 Field
Communicator System Card, an update occurs upon
exit.
Learning the Basics