Emerson 375 User Manual page 47

HART Functionality
Rename a Saved Configuration
The Rename option lets you change the name of a
saved configuration.
To rename a saved HART configuration:
1. Open a saved configuration.
2. From the Saved Configuration menu, double-tap
Rename.
3. Enter the new file name and tap ENTER.
4. Tap SAVE.
Compare Two Saved Configurations
Any two configurations can be compared. However, the
conditions below must be met to compare two
configurations of the same field device.
• Device type (including manufacturer), device revision,
and DD revision must match exactly. A dialog box
appears if the configuration is different, but you will
not be told the differences.
• Configurations can only be compared against other
configurations containing the same set of variables.
The 375 Field Communicator notifies you if this
condition is not met.
• The format of data storage must match exactly. The
375 Field Communicator notifies you if this condition
is not met.
To compare two saved configurations:
1. Open a saved configuration.
2. From the Saved Configuration menu, double-tap
Compare.
3. Choose the storage location that contains the other
configuration file—Internal Flash or Configuration EM
(Expansion Module) and tap ENTER.
4. Double-tap Name to select the configuration file.
5. Double-tap the desired file to compare.
6. Tap COMP to compare the configurations.
7. Tap OK.
3-7