How to Use this Guide
Please read Chapters 1 through 4 when installing the TigerStack II
10/100 hubs. If you have added a Network Management Module
to one of the hubs as an option, also read the Advanced Reference
Guide (included with this module) to learn how to manage your
network.
Twisted-Pair Ports
The RJ-45 ports are located on the front panel of each hub. Ports 1
through 11 on the 12-port models and 1 through 23 on the 24-port
models are labeled with an "x" to indicate that they have a built-in
crossover. Workstations and servers can be connected to these
ports with straight-through cable. The last port on each hub, port
12 or 24, is switch-selectable. There is an associated switch that is
used to enable and disable the crossover, so these ports can always
be connected to another hub or switch with straight-through cable.
Figure 1-3. Twisted-Pair Ports
A
H
BOUT THE
UBS
1-5