100Base-Fx Devices; Figure 4-3. Wiring Closet Connections - SMC Networks TigerStack II 10/100 User Manual

M N C
AKING ETWORK ONNECTIONS

Figure 4-3. Wiring Closet Connections

100BASE-FX Devices

If a slide-in 100BASE-FX module is present, its fiber port may be
used for backbone and longer distance connections.
Each 100BASE-FX device requires 62.5/125 or 50/125 micron
multimode fiber optic cabling with an SC or ST connector at both
ends.
For ST fiber ports, be sure to connect the Tx (Rx) connector on
the slide-in module to the Rx (Tx) connector on the other device.
For SC fiber ports, connect one end of the cable to the SC
connector on the slide-in module and the other end to the SC
connector on the other device. Since SC connectors are keyed, the
cable can be attached to the two devices in only one manner.
4-5