Create At Least 1 Frequency In Each Site; Programming A System For Scanning - Uniden UBCD396XT Owner's Manual

Create at least 1 frequency in each site

Each LTR system can contain up to 20 frequencies in each site, and all sites must
contain at least 1 frequency.
1. On the Edit Site
2. Go to the Set Frequencies
3. Enter at least 1 frequency for this site.
4. When you enter a new frequency, the scanner will prompt you for the
channel number or LCN
20.
5. If you need to change any of the frequency properties, you can do that now.
Unless a property is Required, you can operate the system without changing
the default settings.
Frequency properties
All of these options can be found by selecting the frequency under the
Frequencies sub-menu. If necessary, the sub-menu and option name on each
scanner are listed beside the property.
Property
Logical channel number
None
Lockout
Delete a frequency

Programming a system for Scanning

Once you create the system and at least 1 site, you can
problems. However, if you want to
required elements in following order.
menu, select the site you just created.
sub-menu and select New Frequency.
for that frequency. Enter a number from 1 through
Required
Recommended
Optional
Available operations
Delete Frequency
Scan
UBCD396XT
Option name
Input LCN
Set Lockout
Search
the system, you'll need to program the
38
logical
Set
the system with no