Programming A System For Scanning; Create A Channel Group - Uniden UBCD396XT Owner's Manual

2. Go to the Set Frequencies
3. Enter at least 1 frequency for this site.
4. If you need to change any of the frequency properties, you can do that now.
Unless a property is Required, you can operate the system without changing
the default settings.
Frequency properties
All of these options can be found by selecting the frequency under the
Frequencies sub-menu. If necessary, the sub-menu and option name on each
scanner are listed beside the property.
Property
None
None
Lockout
Available operations
Delete a frequency

Programming a system for Scanning

Once you create the system and at least 1 site, you can
problems. However, if you want to
required elements in following order.

Create a channel group

Each P25 system can contain up to 20 channel groups.
1. On the Program System
2. Go to the Edit Group
3. If you need to change any of the channel group properties, you can do that
now. Unless a property is Required , you can operate the system without
changing the default settings.
Channel group properties
sub-menu and select New Frequency.
Option Name
Required
Recommended
Optional
Set Lockout
Delete Frequency
Scan
menu, select the system you just created.
menu and select New Group .
UBCD396XT
Search
the system, you'll need to program the
55
Set
the system with no