Lcn (Logical Channel Number); Edacs Scat System Options; Set Number Tag; Volume Offset - Uniden UBCD396XT Owner's Manual

UBCD396XT

LCN (Logical Channel Number)

When you enter a new frequency or edit an exisitng frequency, the scanner
prompts you enter a logical channel number (LCN). Enter a number from 1
through 20 for an LTR system or a number from 1 through 30 for an EDACS wide
or narrow system.

EDACS SCAT system options

When you're editing site frequencies within an EDACS SCAT system, you have
the following additional options:

Set Number Tag

Assign a number to this system or channel that you can use to tune directly to a
specific channel. Choose a number from 0 to 999. (For more information, see
Number Tags.)

Volume Offset

The scanner can automatically adjust the volume when it tunes to this channel or
frequency. Enter one of the following options:
Softer No Change Louder
-3, -2, -1 0 (default) +1, +2, +3
125