Programming A System For Scanning; Create At Least 1 Channel Group; Create At Least 1 Channel In Each Group - Uniden UBCD396XT Owner's Manual

Programming a system for Scanning

Once you create the system and at least 1 site, you can
However, if you want to
following order:

Create at least 1 channel group

Each EDACS system can contain up to 20 channel groups, and any system you
want to scan must contain at least 1 channel group.
1. On the Program System
2. Go to the Edit Group
3. If you need to change any of the channel group properties, you can do that
now. Unless a property is Required, you can operate the system without
changing the default settings.
Channel group properties
All of these options can be found by selecting the group name under your scanner's
Edit Group menu. If necessary, the sub-menu and option name on each scanner are
listed beside the property.
Property
None
Name
Quick key
Location information
Lockout
Delete a group

Create at least 1 channel in each group

Each trunked system can contain up to 500 channels.
Scan the system, you'll need to program the required elements in
menu, select the system you just created.
menu and select New Group.
Required
Recommended
Optional
Set Location Info
Available operations
UBCD396XT
Search
Option name
Edit Name
Set Quick Key
Set Lockout
Delete Group
31
the system with no problems.