Uniden UBCD396XT Owner's Manual page 31

UBCD396XT
being scanned blinks.
In Hold mode: This line displays the GQK
number of the current group only.
In Custom Search mode: The numbers of any
programmed search ranges are display on this
line. The number of the custom range that is
currently being searched blinks.
The scanner is in Hold mode.
Hold icon
You switched to the intermediate frequency
IFX icon
(IF exchange).
Keypad lock (or GPS) : The keypad is locked. (Available only
Icon on handheld models.)
GPS: The scanner is receiving data from the
GPS device.
The current channel is locked out.
Lockout icon
This icon displays the modulation type of the
Modulation icon
current channel: AM, FM, NFM, FMB, or
WFM.
The current channel is set as a priority
Priority icon
channel.
Steady: Priority scan is turned on.
Priority scan icon (PRI)
Blinking: Priority Plus scan is turned on.
The Repeater Find feature is turned on.
REP icon
This icon displays the strength of the current
Signal level icon
signal; the icon ranges from zero bars (no
signal) to five bars (strong signal).
In Scan mode: The system/site Quick Key
System number line (Sx:)
numbers (SQK) of any unlocked systems or
sites are displayed on this line. The SQK
number of the system or site that is currently
being scanned blinks. For SQK numbers
above 9, the tens digit replaces the X in the
icon; the ones digits are shown on this line.
In Hold mode: This line displays the SQK
number of the current system or site only. For
SQK numbers above 9, the tens digit replaces
the X in the icon; the ones digit is displayed on
this line.
In Service Search mode: The icon SCR
replaces the System numbers if the broadcast
screen feature is turned on.
17