Quick Keys; Programming Quick Keys; Assigning An Sqk - Uniden UBCD396XT Owner's Manual

21. Quick Keys

 Quick Keys let you enable or disable systems and channel groups during a
scan. Disabled systems and channel groups are ignored during scans.
 You can assign Quick Keys at the system/site level (System/site Quick Key
or SQK), at the channel group level (Group Quick Key, or GQK), or at both
levels.
 You can assign an SQK to the temporary system Close Call Hits that is
created during
any other system.
 You can assign Quick Keys to service searches and custom search ranges.
These search Quick Keys operate like regular SQKs.

Programming Quick Keys

Assigning an SQK

 Multiple systems, sites, and search ranges can share the same SQK.
 All systems and sites assigned to the same SQK will be enabled (or
disabled) when you enter the Quick Key.
 SQKs range from 0 to 99.
To a conventional system:
1. Open the Program System
2. Select the system you want to assign the Quick Key to.
3. Select Edit Sys
4. Enter the Quick Key you want to use for this system.
To a trunked system:
1. Open the Program System
2. Select the system you want to assign the Quick Key to.
3. Select Edit
4. Select Set Quick
To the Close Call Hits system :
1. Open the Close Call
2. Select Hits with
3. Enter the Quick Key you want to use for the Close Call Hits system.
Close Call searches. This system and its SQK operate like
menu.
Option, then select
menu.
Site, then select the site you want.
Key, then enter the Quick Key you want to use for this site.
menu.
Scan, then select Set Quick Key to.
UBCD396XT
Set Quick Key.
79