Deleting A Programmed Frequency (Programming "000.0000") - Uniden BC350C Manual

Deleting a programmed frequency
(programming "000.0000")
You can erase a programmed frequency in a channel by
programming "000.0000" into its channel. You can find and
display "000.0000" on the screen in one of two ways:
Find an open channel in the private bank. Press the desired
bank key (PRIVATE, POLICE, or FIRE/EMS) then [HOLD],
and use [UP] and [DOWN] to scroll through the bank to find
an open channel, "000.0000"
– OR –
Find "000.0000" from the Search & Program Mode. Every
search band has one "000.0000" display included between
the band limits. It can be displayed only in the Program Mode
(after pressing [PROG] and "CH" is blinking in the display).
Note: Press [BAND] to escape from programming mode
before step 4.
27