16. Single-Frequency P25 Trunked Systems
Single-frequency P25 systems are almost idfentical to
except they only have one site per system and the system can use a P25 network
address.
Programming a Single-Frequency P25 System
To program a single-frequency P25 system, you'll need to program the required
elements in following order:
Create a system
1. Go to the
Program System
2. The scanner will prompt you for the System Type. Select P25.
3. When the scanner prompts you to select Standard Trunk or One-Freq Trunk
select One-Freq Trunk, then tap YES.
4. The scanner creates the system with a default name. Select
want to change it.
5. If you need to change any of the system properties, you can do that now.
Unless a property is Required, you can operate the system without changing
the default settings.
System properties
(All of these options can be found under the
the submenu and the exact option name are listed beside each property.)
Required
Recommended
Optional
UBCD396XT
menu and choose New System.
Name
Network address
Number tag
Automatic gain control (AGC)
Delay time
ID format
(Set ID Format (DEC/HEX)
ID scan/search
59
standard P25
Program System
None
(Edit
Name)
(P25 NAC
Option)
(Set Number
Tag)
(Set Audio
AGC)
(Set Delay
Time)
(ID
Scan/Search)
systems,
Edit Name
if you
menu. If necessary,