Create A Site; Create At Least 1 Frequency - Uniden UBCD396XT Owner's Manual

Create a site

Each EDACS SCAT system must contain exactly 1 site.
1. On the Program System
2. Go to the Edit Site
3. If you need to change any of the site properties, you can do that now. Unless
a property is Required, you can operate the system without changing the
default settings.
Site properties
All of these options can be found under your scanner's
necessary, the sub-menu and option name on each scanner are listed beside the
property.
Property
None
Quick key
Attenuator
Hold time
Location information
Lockout
Modulation
Startup key
None

Create at least 1 frequency

Each EDACS SCAT system must contain at least 1 frequency in its site.
1. Open the Edit Site
2. Go to the Set Frequencies
3. Enter at least 1 frequency for this site.
menu, select the system you just created.
menu.
Required
Recommended
Optional
Set Location Info
Set Modulation
Set Startup Key
Available operations
menu.
sub-menu and select New Frequency.
UBCD396XT
Option name
Set Quick Key
Set Attenuator
Set Hold Time
Set Lockout
25
Edit Site menu. If