Quick Search; Custom Search - Uniden UBC800XLT Owner's Manual

UB356ZH.fm Page 87 Wednesday, December 19, 2007 11:28 AM
Notes:
• If all frequencies in the search range you selected are locked out, All
Locked! appears and the scanner does not search the range.
• If the service range you select uses channels (such as CB Radio or Marine),
the scanner displays the service channel number.

Quick Search

Quick Search lets you search from the currently-tuned frequency if you are
scanning a conventional system or sets the system to ID search if you are
scanning a trunked system.
If you are on a conventional system or channel, press
start quick search. Quick Search? Yes = "E" / No = "." appears. Press
[HOLD/RESUME] to go to quick search hold.
Press [E ] to start quick search or [.No] to go to the search menu.
YES

Custom Search

Custom Search lets you program and search 10 custom search ranges. You can
search any of these ranges simultaneously and select each custom search range
you set. During custom search, the scanner searches starting with the lowest
frequency in the search range you select to the highest frequency in the range.
There are two methods to begin a custom search.
Default Search Range
Custom 1 : 25.0000 - 87.2875 MHz (Plan 1)
: 25.0000 - 87.2950 MHz (Plan 2)
: 25.0000 - 87.2937 MHz (Plan 3)
Custom 2 : 87.3000 - 107.9500 MHz
Custom 3 : 108.0000 - 136.9875 MHz
Custom 4 : 137.0000 - 173.9900 MHz (Plan 1,2)
: 137.0000 - 173.9937 MHz (Plan3)
Custom 5 : 174.0000 - 215.9500 MHz
Custom 6 : 216.0000 - 224.9950 MHz
Custom 7 : 225.000 - 399.9750 MHz
Custom 8 : 400.0000 - 512.0000 MHz
Custom 9 : 806.0000 - 960.0000 MHz
Custom 10 : 1240.0000 - 1300.0000 MHz
F
+ [SCAN/SEARCH] to
Searching and Storing
87