Setting The Maximum Auto Store Value - Uniden UBC800XLT Owner's Manual

UB356ZH.fm Page 100 Wednesday, December 19, 2007 11:28 AM
This setting determines whether the scanner automatically ignores transmissions
found during Custom Search, Quick Search, or Close Call operation that are on
common broadcasts, paging systems, and other annoyance radio sources.
Note: Broadcast screening does not work in All service search ranges.
Set All Band On — turns on broadcast screen on each band.
Set All Band Off — turns off broadcast screen on each band.
Set Each Band — lets you set broadcast screen only on specific bands you
select. On or Off appears next to each option. Turn the Scroll Control to select
F
an option then press
Band 1-10 — select the custom band where you want to screen out broadcast
sources.
Program Band — brings you to a menu setting to let you program a custom
frequency range for broadcast screen. Turn the Scroll Control to select an option
F
then press to change the following setting.
To set the custom range of a band, select one and press
Band 1-10 — select the group where you want to screen out broadcast sources.
Set Lower Limit— enter the lower limit of the frequency range, then press
to set it.
Set Upper Limit — enter the upper limit of the frequency range, then press
to set it.
To set the custom range of a band, select one and press

Setting the Maximum Auto Store Value

[MENU]
Srch/CloCall Opt
Max Auto Store
This value sets how many hits the scanner will automatically store when it is in
either Search and Store or Close Call Auto Store mode. Use the number keys to
enter a value from 1 - 256, then press
When the scanner exceeds the maximum number of hits you set, it stops the
auto-store operation.
100
to change the setting.
F
F
F
. The default value is 100.
F
to set the limit.
F
to set the limit.
F
F