Edit Site - Uniden UBC800XLT Owner's Manual

UB356ZH.fm Page 73 Wednesday, December 19, 2007 11:28 AM
Notes:
• Access single-digit system/site Quick Keys by pressing the single digit on the
keypad during scanning. Access two-digit system Quick Keys by pressing
[.No] then both digits.
• You can assign as many systems to the same quick key as you want.
• To be scanned, a system/site's Quick Key must be activated and the system
must be unlocked.
Setting the Site Startup Key
[MENU]
Program System
Select a trunked system
F

Edit Site

Select a Site
Set Startup Key
Select a startup key from [0] to [9] or select [.No] for no startup key.
Notes:
• To unlock the system at startup, press and hold the selected startup key while
you turn on the scanner.
• The system/site's Quick Key is enabled when it is unlocked.
• If you press a different key at startup, the system is locked out.
• If you do not assign the system a startup key, the system is not affected by any
key press during startup.
Setting Site Frequencies
[MENU]
Program System
Select a trunked system
F
Edit Site
Select the site
Set Frequencies
New Frequency (or select an existing frequency)
Input a system frequency using the number keys and [.No] key, then press
you are entering frequencies for an LTR or EDACS system, the scanner also
prompts you to enter the LCN for the frequency you just entered. Obtain LCN's
(logical channel numbers) from the same source as the other system information.
To enter additional frequencies, press [MENU], then
Frequency. Then repeat the above.
F
F
F
F
F
F
F
F
F
to select New
Programming Your Scanner
MESL
MESL
F
. If
73