Gps Review Location Mode - Uniden UBC800XLT Owner's Manual

UB356ZH.fm Page 113 Wednesday, December 19, 2007 11:28 AM
GPS Display Mode
If you press [GPS], the scanner switches to a GPS display mode. In this mode,
you can see location information as well as information about your position relative
to the selected POI. The third line of the screen shows Off if no POI is selected.
Rotate the Scroll Control to select different POI's.
F
Press + [GPS] to toggle the Display mode in order.
GPS DATA Display ETA Display Clock Display
kmh
Elevation Display Speed Display Location Display

GPS Review Location Mode

If you have programmed data for a Point of Interest, Dangerous Crossing, and a
Dangerous Road, you can review each set on a screen dedicated to showing just
that data.
Press [E ] in GPS Mode.
YES
Important: While you are in normal GPS mode or Scan Mode and you press and
hold [GPS] for 2 seconds, location data at that point is stored. The scanner opens
a dialog to store your current location. The default name is T YYMMDD hhmmss
that indicates the date and time you stored the location point.
The data is put into memory and you are given the opportunity to designate the
location as POI, Dangerous Xing, or Dangerous Road.
However, if you are in Review Mode and press and hold [GPS], the data of the
new point will overwrite the currently displayed data.
The some of the following keys have a somewhat different function while in GPS
Review Mode.
Using the UBC800XLT with a GPS
113