Quick Search; Custom Search - Uniden UBCD996T Owner's Manual

To lock out a frequency found while searching, press
lock it out (
Temporary
appears).
Out
Notes:
! If all frequencies in the search range you selected are locked out,
appears and the scanner does not search the range.
! If the service range you select uses channels (such as CB Radio or Marine), the
scanner displays the service channel number.

Quick Search

Quick Search lets you search from the currently-tuned frequency if you are scanning
a conventional system or sets the system to ID search if you are scanning a trunked
system.
If you are on a conventional system or channel, press
start quick search.
Quick Search? Yes = "E" / No = "."
[HOLD/RESUME] to go to quick search hold.
Press [E ] to start quick search or
YES

Custom Search

Custom Search lets you program and search 10 custom search ranges. You can
search any of these ranges simultaneously and select each custom search range
you set. During custom search, the scanner searches starting with the lowest
frequency in the search range you select to the highest frequency in the range.
There are two methods to begin a custom search.
Notes:
! Search ranges are preset. These ranges can be edited. See " Editing a Custom
Search Range" on Page94 on Page to change the range.
! You cannot turn off all custom search ranges.
g Q
[MENU]
Search for ...
Q
Custom Search ...
The other approach is:
+ [SCAN/SEARCH]
Quick Search? Yes="E" / No="."
Q
Press
[.No] then
L/O appears) or twice to permanently lock it out (
[.No] to go to the search menu.
g
g
g
g
to
Custom Search
93
[L/O] one time to temporarily
Locked
All Locked!
+ [SCAN/SEARCH]
appears. Press
.
to