Setting The Distance Units; Setting The Serial Port Speed - Uniden UBC800XLT Owner's Manual

UB356ZH.fm Page 54 Wednesday, December 19, 2007 11:28 AM
This setting controls the format used for adjusting Universal time to local time. Set
your local time's offset from UTC (formally known as GMT).

Setting the Distance Units

[MENU]
Settings
Set GPS Format
F
Set Unit
This setting controls the distance units shown in the GPS data screens and used
for entering distance for POI's
mile — The scanner uses miles.
km — The scanner uses kilometers.
The selection items of the location range and the speed also changes by this
selection.

Setting the Serial Port Speed

[MENU]
Settings
Set Serial Port
Set Baud Rate
Set Front Port or Set Rear Port
Use this setting to control the data rate used for the front and back panel serial
ports. You typically set the front port to match the speed used to communicate with
your PC (default 115200 bps) and the back port to the speed used to communicate
with an attached GPS (default 4800 bps). Note that the back port is male. You may
need a gender changer and a null modem adapter to use a typical DB9 serial
cable from the rear port.
For Serial Port Speed (Baud Rate), select from
4800 bps
9600 bps
19200 bps
38400 bps
57600 bps
115200 bps
OFF
54
F
F
F
F
F
F