Quick Search - Uniden BCD396T Manual

Hide thumbs Also See for BCD396T:

Owner's manual (156 pages)

Owner's manual (156 pages)

Owner's manual (154 pages)

Table Of Contents

Table of Contents

Easier to Read BCD396T/UBCD396T Digital Scanner Manual

Set Delay Time

This setting determines how long the scanner waits after a transmission ends before resuming

The default setting is 2 seconds.

Scroll to 'Set Delay Time' and press E/yes.

Scroll to 1, 2, 3, 4, 5, (seconds) or Off then press E/yes to save and exit.

Set Modulation

This setting controls the modulation type used for

operations.

Scroll to 'Set Modulation' and press E/yes.

Scroll to Auto, AM, FM, NFM, or WFM to choose the modulation then press E/yes to save and exit.

Set Attenuator

This setting controls the attenuator for

sources to attenuate about 18dB. Attenuation sometimes helps to reduce interference and desensitization that strong signals create. The default setting is Off.

Scroll to 'Set Attenuator' and press E/yes.

Scroll to On or Off then press E/yes to save and exit.

Set Data Skip

This setting controls how the scanner behaves when it detects a data transmission during

default setting is Off.

Scroll to 'Set Data Skip' and press E/yes.

Scroll to On or Off then press E/yes to save and exit.

Note: If you are trying to test the Close Call feature with a nearby transmitter and you do not talk into the transmitter, the scanner will detect this as data

and will skip the frequency when Data Skip is on.

Set Step

This setting selects the frequency step used for

Scroll to 'Set Step' and press E/yes.

Scroll to Auto, 5, 6.25, 7.5, 8.33, 10, 12.5, 15, 20, 25, 50, or 100 to set the step then press E/yes to save and exit.

Important! There are many options and setting in

Note: The items below

Blue) do not follow the radio's menu order because (IMHO) they should be in the following order to properly setup and use the Search

(in

features.