UB356ZH.fm Page 43 Wednesday, December 19, 2007 11:28 AM
Turning On the Scanner and Setting the Squelch
To turn the scanner on, rotate [VOL] clockwise. Turn the knob to a comfortable
sound level.
Rotate the squelch control [SQ] clockwise until you either hear a broadcast or
noise just stops. The control is now set for strong signals. If you desire to hear a
weaker signal, turn it counter clockwise from that point until you hear background
noise once more.
Startup Key Operation
You can setup a Startup Key Configuration so that the scanner can change the
lockout for each system or each site by pressing an assigned key while you power
up the scanner or an opening screen is displayed. Navigate to Set Startup Key
there are differences in the menu structure for Trunked and Conventional systems.
Conventional
[MENU]
Program System
Select the conventional system
Edit Sys Option
Set Startup Key
Trunked
[MENU]
Program System
Select the trunked system
F
Edit Site
Select the site
Set Startup Key
Search Range
[MENU]
Search for...
Edit Service
Select a Service Range
Search with Scan
Set Startup Key
OR
Operation
F
F
F
F
for each system.
F
F
F
F
for each system or site.
F
F
F
F
F
Operation
43