Uniden UBC800XLT Owner's Manual page 65

UB356ZH.fm Page 65 Wednesday, December 19, 2007 11:28 AM
Setting the Startup Key
[MENU]
Program System
Select a conventional system
Edit Sys Option
Set Startup Key
Select a startup key from 0-9 or select [.No] for no startup key.
Notes:
• To unlock the system at startup, press and hold the selected startup key while
you apply power. If you do not press the startup key at the time you turn on
power, you can still act while the opening screens are displayed.
• The system Quick Key is also enabled.
• If you press a different key at startup, the system is locked out.
• If you do not assign the system a startup key, the system is not affected by any
key press during startup.
Setting the System Lockout
[MENU]
Program System
Select a conventional system
Edit Sys Option
Set Lockout
Unlocked — The system is scanned when its quick key is enabled.
Temporary L/O — The system is not scanned, even if its quick key is enabled.
Cycling power removes the lockout.
Lockout — The system is not scanned, even if its quick key is enabled. You must
manually unlock the system.
Setting the System Hold Time
[MENU]
Program System
Select a conventional system
Edit Sys Option
Set Hold Time
Set how long the scanner will remain scanning on this system before moving to the
next system (up to 255 seconds). Note that the scanner will scan all unlocked
channels at least one time, regardless of the system hold time setting.
F
F
F
F
F
F
F
F
F
F
F
F
Programming Your Scanner
C
C
C
65