Gps; Search - Uniden UBC800XLT Owner's Manual

UB356ZH.fm Page 15 Wednesday, December 19, 2007 11:28 AM
Startup Configuration — Lets you easily manage multiple configurations for your
scanner.
Single-Handed Function Control Operation — You can tap the Function/Scroll
Control to enable the Function mode. It reverts to normal mode in about 3 seconds
from your last press if no other action occurs.
Record Output Jack — Using the appropriate cable and audio recording device
with signal control, you can record live audio of designated channels.
Display and Keypad Backlight — Makes the display and keypad easy to see in
dim light using three levels plus off.
Vehicle Power Connection (Orange Wire) — Lets you connect to your vehicle's
dimmer circuit to also dim the scanner's display with the vehicle's dimmer control.
Trunk Tracker III™ Operation — Follows unencrypted conversations on analog
Motorola, EDACS, EDACS SCAT, and LTR trunked radio systems, including
systems in VHF, UHF, 800 MHz, and 900 MHz bands. The scanner can scan both
conventional and trunked systems at the same time.
Multi-Site Trunking — Lets you share system channels across multiple sites to
more efficiently use the scanner's memory and more easily select sites to monitor.
Control Channel Only Scanning — If the scanner is set to scan a Motorola
system, you can set it so it scans using only control channel data. You do not have
to program voice channel frequencies into memory in this mode as long as all
possible control channels are programmed.

GPS

Location Based Scanning — If you connect a GPS unit to the scanner it can
automatically enable and disable systems based on the Location Information
(longitude, latitude, Range) that you provide.
GPS Non-Radio Based Features — The scanner alerts you to Dangerous
Intersections, Speed Alerts, and Points of Interest that you program into the
scanner.
GPS Display Mode — Lets you display extended GPS information such as
Distance to a POI, Direction to a POI, Time to a POI, Speed, Position, and more.

Search

Service Search — Lets you quickly select and search the scanner's
preprogrammed frequencies.
FEATURE SUMMARY
15