Setting The Group Quick Key; Editing Channels; Locking Out Channel Groups - Uniden UBC800XLT Owner's Manual

UB356ZH.fm Page 78 Wednesday, December 19, 2007 11:28 AM
• The group and system (for conventional, SCAT, and LTR systems) or site (for
Motorola and EDACS systems) name alternate in the top line of the display
when the scanner stops on a channel.
• Press [.No] twice to delete the current character.
• Press [.No] three times to clear the entire alpha tag.

Setting the Group Quick Key

To assign a Quick Key to a Group, follow these steps.
[MENU]
Program System
Select a system
F
Edit Group
Select the Group
Set Quick Key
Select a desired quick key for this Group.

Editing Channels

Once you create a channel group, store channels in that group. See "Programming
Channels" on Page 79 for specific channel options.

Locking Out Channel Groups

[MENU]
Program System
Select an existing system
F
Edit Group
Select an existing group
Set Lockout
This setting determines whether the scanner will scan this group of channels.
Select your setting, then press
Lockout — the group is not scanned.
Temporary L/O — the group is not scanned for this session. The L/O is
cancelled when you cycle power.
Unlocked — the group is scanned. The default setting is Unlocked.
78
F
F
F
F
F
F
F
F
F
.
MECL
MECL