Scanning Systems - Uniden UBC800XLT Owner's Manual

UB356ZH.fm Page 44 Wednesday, December 19, 2007 11:28 AM
[MENU]
Search for...
Edit Custom
Select a Custom Range
Search with Scan
Set Startup Key
Assign all the systems/sites that you want to scan at the same time to the same
startup key [0] to [9]. You can only assign a site/system to one startup key. To
leave a system unassigned, press [.No].

Scanning Systems

To begin scanning preprogrammed or programmed systems, press
[SCAN/SEARCH]. The UBC800XLT scans all unlocked systems in all
programmed and activated quick-key groups and any searches unlocked for
search with scan.
To enable or disable systems or sites for scanning, press the site/system's
System/Site Quick Key while scanning.
Notes:
• If no systems are programmed, or all systems are locked out, Nothing to
Scan appears. Program a system or select a system to scan.
• When scanning multiple systems, the UBC800XLT scans systems according
to the assigned quick key. Systems assigned to quick key 1 are scanned first,
then 2, 3, 4, etc. Systems not assigned to a quick key are scanned last, then
unlocked searches. Within a quick key, systems are scanned in the order they
were assigned.
• Within a system, channels are scanned according to the assigned channel
group, with the same priority as described above for systems.
• The UBC800XLT scans a system for the duration you set using the System
Hold Time option (see "Setting the System Hold Time" on Page 65). For
trunked systems, the scanner moves to the next system after the hold time
expires, the current transmission ends, and the channel delay expires.
Conventional systems operate similarly, but all unlocked channels are scanned
at least one time regardless of the hold time setting.
• Each search range is searched for the amount of time you set using the "Set
Hold Time" option. See "Setting the System Hold Time" on Page 65 for more
information.
44
F
F
F
F
F