Select a New Group
Edit Name
Follow these steps to enter/edit the group name.
1. The current name displays with the first character of the name highlighted.
2. Rotate the Scroll Control to select a new first letter. Press [6] to move one
character to the right. Repeat the Scroll Control action to change the
character. To move one character to the left, press [4].
3. Repeat Step 2 until you have entered the system name. Then press
accept the setting.
Notes:
• Each group name can be up to 16 characters. Abbreviate as necessary to fit.
• The group and system (for conventional, SCAT, and LTR systems) or site (for
Motorola and EDACS systems) name alternate in the top line of the display
when the scanner stops on a channel.
• Press [.No] twice to delete the current character.
• Press [.No] three times to clear the entire alpha tag.
Setting the Group Quick Key
To assign a Quick Key to a Group, follow these steps.
[MENU]
Program System
Select a system
Edit Group
Select the Group
Set Quick Key
Select a desired quick key for this Group.
Editing Channels
Once you create a channel group, store channels in that group. See "Programming
Channels" on Page 85 for specific channel options.
Locking Out Channel Groups
[MENU]
Program System
Select an existing system
Edit Group
84
F
F
F
F
F
F
F
F
F
F
F
to
MECL
MECL