Table of Contents
Advertisement
SC230 Paper OM 062206.fm Page 58 Friday, July 21, 2006 7:39 PM
Follow these steps to enter/edit the group name.
1. Rotate the scroll control to select the first letter.
2. Press and hold down
control once to select the next letter.
3. Repeat Steps 1 and 2 until you have entered the
group name. Then press E or press down on the
scroll control to accept the setting.
Hints:
• Each group name can be up to 16 characters.
Abbreviate as necessary to fit.
• The group and system name alternate in the top line
of the display when the scanner stops on a channel.
• Press
twice to delete the current character.
• Press
three times to clear the entire alpha tag.
Setting the Group Quick Key
program system
Menu
Select the system
E
Edit Group
Select the group
E
Set Quick Key
After selecting this option, press 0-9 to assign the group
to a quick key or press No to assign the system to no
quick key, then press E.
Hints:
• You can assign as many groups to the same quick
key as you want.
• To be scanned, a group's quick key must be
activated.
Setting Group Lockout
program system
Menu
Select the system
E
Edit Group
Programming/Editing Optional Settings
then rotate the scroll
Func
E
E
E
E
E
58
Advertisement
Table of Contents
