Playback; Preparations; Turning The Power On; Selecting The Input Source - Denon AVR-390 Owner's Manual

ENGLISH

Playback

Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote
control unit
Button only on the main unit
Button only on the remote control unit
<TUNER>
INPUT SELECT
<EXT. IN> STATUS
<VIDEO> <AUDIO>
<ON/STANDBY>
PHONES jack
[POWER OFF]
DIGITAl INPUTS
STATUS
MEMORY/ENTER


Preparations

BUTTON

Turning the Power On

<BUTTON>
[BUTTON]
1
Connect the power cord.
The power indicator lights red and the power is set to the
MASTER VOLUME
standby mode.
<TUNING >
df
2
Press
The power indicator flashes green and the power turns on.
b Also press
turns on. In this case the input source is selected by remote
control unit.
Turning the Power Off
<ON/STANDBY>
Press
MEMORY/ENTER
The power is set to the standby mode.
DIGITAL INPUTS
NOTE
Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long
[POWER ON]
periods of time or when traveling, unplug the power cord from the
power outlet.
INPUT SELECT
TUNER
[BAND]
[DIMMER]
d
MASTER VOLUME
f
[MUTE]
<ON/STANDBY> [POWER ON].
or
INPUT SELECT
when in standby mode, the power
[POWER OFF]
or .

Selecting the Input Source

INPUT SELECT
Select the source using
The input source changes as follows each time you press
<VIDEO>
.
VCR DVD
V.AUX
The input source changes as follows each time you press
<AUDIO>
.
CD AUX
CD-R / TAPE
The input source changes as follows each time you press
<TUNER>
.
FM MONO AM
FM ST
<EXT. IN>
Press to select "EXT. IN".
Switching between Digital Audio Input
and Analog Audio Input
When a single source is connected by both digital and analog
connectors, this enables you to change the audio input method
with one button.
DIGITAL INPUTS
Press .
Each time this button is pressed, the corresponding input is selected
as follows:
z
VCR : O(ptical)
A(nalog)
DVD : C(oaxial) 1
CD : C(oaxial) 2
z Displays the connected terminal name.
NOTE
• When TUNER, AUX, CD-R / TAPE, EXT. IN or V.AUX is selected as
an input source, the analog input is selected automatically.
• When the selected digital input is not connected, the analog input
is automatically selected.
• The sound from the component connected to the selected digital
input can be heard regardless of the selected input source.
.