Table of Contents
Advertisement
DTIM Interval
Beacon Interval
Maximum Associated
Clients
TM
Xpress
Technology
Wireless Media Extension Provides an interim QoS solution for 802.11 networks
TM
54g
Mode
Delivery Traffic Indication Message (DTIM), also known
as Beacon Rate. The entry range is a value between 1
and 65535. A DTIM is a countdown informing clients of
the next window for listening to broadcast and multicast
messages. When the AP has buffered broadcast or
multicast messages for associated clients, it sends the
next DTIM with a DTIM Interval value. AP Clients hear
the beacons and awaken to receive the broadcast and
multicast messages. The default is 1.
The amount of time between beacon transmissions.
Each beacon transmission identifies the presence of an
access point. By default, radio NICs passively scan all
RF channels and listen for beacons coming from access
points to find a suitable access point.
Before a station enters power save mode, the station
needs the beacon interval to know when to wake up to
receive the beacon (and learn whether there are
buffered frames at the access point).
The entered value is represented in ms. Default is 100.
Acceptable entry range is 1 to 0xffff (65535)
This is the maximum number of client allowed to
connect to the router.
Xpress Technology is compliant with draft specifications
of two planned wireless industry standards.
until the release of 802.11e. WRAP (Wireless Robust
Authenticated Protocol) An encryption protocol in the
802.11i standard. WRAP is based upon the Offset
Codebook (OCB) mode of AES. WRAP is being replaced
with CCMP.
Select the mode to 54g Auto for
the widest compatibility. Select the mode to
54g Performance for the fastest performance
among 54g certified equipment. Set
the mode to 54g LRS if you are experiencing
difficulty with legacy 802.11b equipment.
98
Advertisement
Table of Contents
