Table of Contents
Advertisement
The user must configure the IP Address and the Subnet Mask. To use the DHCP
service on the LAN, select the Enable DHCP server checkbox, and enter the Start
IP addresses, the End IP address and DHCP lease time. This configures the router
to automatically assign IP addresses, default gateway address and DNS server
addresses to each of your PCs.
Note 1: Enable DHCP Server Relay will not display if Firewall is enabled in the
previous step.
Note 2: The router's default IP address is 192.168.1.1 and the default private
address range provided by the ISP server in the router is 192.168.1.2 through
192.168.1.254.
7. The following screen will be displayed. To enable the wireless function, select the
box (by clicking on it) and input the SSID. Then, click Next.
The following screen will be displayed.
50
Advertisement
Table of Contents
