Table of Contents
Advertisement
6. After entering your settings, select Next to display the following screen. The
WAN Setup-Summary screen presents the entire configuration summary. Click
Save/Reboot if the settings are correct. Click Back if you wish to modify the
settings.
7. The following screen will be displayed. To enable the wireless function, select
the box (by clicking on it) and input the SSID. Then, click Next.
The following screen will be displayed.
After clicking Save/Reboot, the router will save the configuration to the flash
memory, and reboot. The Web UI will not respond until the system is brought up
again. After the system is up, the Web UI will refresh to the Device Info page
automatically. The CT-5361T is ready for operation and the LED indicators display
as described in the LED description tables (subsection 1.3).
47
Advertisement
Table of Contents
