Table of Contents
Advertisement
Source Subnet Mask
Source Port (port or port:port)
Destination IP address
Destination Subnet Mask
Destination port (port or port:port)
SET-2
802.1p Priority
If the Enable Differentiated Service Configuration box is ticked (i.e. selected)
the following screen will be displayed:
Enter the subnet mask for the source IP
address.
Enter source port number or port
range.
Enter destination IP address.
Enter destination subnet mask.
Enter destination port number or port
range.
Select between 0-7. The lower the digit
shows the higher the priority
72
Advertisement
Table of Contents
