Table of Contents
Advertisement
Traffic Class Name
Assign ATM Transmit Priority
Mark IP Precedence
Mark IP Type Of Service
Mark 802.1p if 802.1q is enabled on WAN
SET-1
Physical LAN Port
Protocol
Source IP Address
Enter name for traffic class.
Select Low, Medium or High.
Select between 0-7. The lower the digit
shows the higher the priority.
Select either: Normal Service, Minimize
Cost, Maximize Reliability, Maximize
Throughput, Minimize Delay
Select between 0-7. The higher the
digit shows the higher the priority.
Select between ENET(1-4), USB,
Wireless and Wireless_Guest.
User can select from: TCP, TCP/UDP,
UDP or ICMP.
Enter the source IP address.
71
Advertisement
Table of Contents
