Table of Contents
Advertisement
6.3
NAT
To display the NAT function, you need to enable the NAT feature in the WAN Setup.
6.3.1
Virtual Servers
Virtual Server allows you to direct incoming traffic from WAN side (identified by
Protocol and External port) to the Internal server with private IP address on the LAN
side. The Internal port is required only if the external port needs to be converted to
a different port number used by the server on the LAN side. A maximum 32 entries
can be configured.
To add a Virtual Server, simply click the Add button. The following will be displayed.
59
Advertisement
Table of Contents
