Table of Contents
Advertisement
1.3
Front Panel LED Indicators
The front panel LED indicators are shown in the picture below and followed by an
explanation in the table below.
LED
Color
Green
Red
POWER
Green
LAN
4x~1x
Green
Green
WLAN
Green
Green
USB
Green
Mode Function
On
The router is powered up.
Off
The router is powered down.
On
POST (Power On Self Test) failure (not bootable) or
Device malfunction.
A malfunction is any error of internal sequence or state
that will prevent the device from connecting to the
DSLAM or passing customer data. This may be
identified at various times such after power on or
during operation through the use of self testing or in
operations which result in a unit state that is not
expected or should not occur.
On
An Ethernet Link is established.
Off
An Ethernet Link is not established.
Blink Data transmitting or receiving over LAN.
On
The wireless module is ready and idle.
Off
The wireless module is not installed.
Blink Data transmitting or receiving over WLAN.
On
A USB link is established.
Off
A USB link is not established.
Blink Data transmitting or receiving over USB.
7
Advertisement
Table of Contents
