Intercom - VTech DS6321-2 User Manual

Telephone operation

Intercom

Use the intercom feature for conversations between two system handsets.
You can buy additional expansion handsets (DS6301) for this telephone
system. You can register up to 12 handsets to the telephone base.
To initiate an intercom call:
Press MeNu/
1.
in use.
2. Press or
/SeleCT.
MeNu
• If you have a two-handset system, your handset
displays Calling other handset. The destination
handset rings and displays handset X is calling.
• If you have more than two handsets, your handset
displays INTeRCoM To: and a list of registered
handsets. Press
handset and then press
handset displays Calling handset X. The
destination rings and displays handset X is calling.
To answer an intercom at the destination handset:
/hoMe/FlASh or
• Press
To silence an intercom call:
• Press oFF/
CleAR
displays Ringer mute for a few seconds.
To end an intercom call:
Press oFF/
•
CleAR
charger. Both handsets display Intercom ended.
• You can cancel the intercom call before it is answered by pressing
oFF/
CleAR
• If the destination handset does not answer the intercom call within 100
seconds, is in the directory or call log, or is out of range, the originating
handset displays unable to call try again and returns to idle mode.
• You can use a maximum of five handsets at a time. For example, when
four handsets are used on intercom calls, use another handset for an
outside call. When two handsets are used on an intercom call, you can use
three other handsets for an outside call.
on the handset when it is not
SeleCT
to highlight Intercom, then press
or to select a destination
MeNu
or MuTe/
ReMoVe
or place either handset back in the telephone base or
on your originating handset.
/SeleCT. Your
Both screens show Intercom.
.
on the destination handset. Its screen
49
Ans. system
Directory
Cal l log
Intercom
Bluetooth
INTERCOM TO:
Handset 2
Handset 3
Handset 4
Handset 5