Answering System Setup; Call Screening; Number Of Rings - VTech DS6321-2 User Manual

Answering system settings

Answering system setup

In the answering system setup menu, you can change the settings for call
screening, number of rings, remote access code, message alert tone and
voice prompt language.

Call screening

The call screening feature lets you listen at the telephone
base to a caller leaving a message. You can turn this
feature on or off with a system handset.
To change the setting:
Press MeNu/
1.
in use.
2. Press or
/SeleCT.
MeNu
3. Press or
/SeleCT.
MeNu
/SeleCT to choose Call screening.
4. Press
MeNu
5. Press or
/SeleCT to confirm.
MeNu

Number of rings

When the answering system is turned on, it answers all
incoming home calls after the number of rings set. You can
choose from two, four, or six rings; or toll saver. With toll
saver selected, the answering system answers after two
rings when you have new messages, and after four rings
when you have no new messages. This enables you to
check for new messages and avoid paying unnecessary
long distance charges if you are calling from out of your
local area.
To change the setting:
Press MeNu/
1.
in use.
2. Press or
/SeleCT.
MeNu
3. Press or
/SeleCT.
MeNu
4. Press or
/SeleCT.
MeNu
5. Press or
press /SeleCT to confirm.
MeNu
on the handset when it is not
SeleCT
to highlight Ans. system, then press
to highlight Ans sys setup, then press
to choose on or off, then press
on the handset when it is not
SeleCT
to highlight Ans. system, then press
to highlight Ans sys setup, then press
to highlight # of rings, then press
to choose from 2, 4, 6 or Toll saver, then
37
ANS. SYSTEM
Delete al l old
Record memo
Answer ON/OFF
Ans sys setup
ANS SYS SETUP
Cal l screening
# of rings
Remote code
Msg alert tone
CALL SCREENING
On
Off
ANS SYS SETUP
Cal l screening
# of rings
Remote code
Msg alert tone
# OF RINGS
2
4
6
Tol l saver