Active Devices; Review The Active Devices List; Connect/Disconnect An Active Device - VTech DS6321-2 User Manual

Bluetooth

Active devices

Only devices on the active devices list can establish a Bluetooth connection
with the telephone base. Although two paired devices can be connected to
the telephone base, only one Bluetooth cell phone or a headset can be on a
call at a time.
When adding, removing, or replacing a Bluetooth device on the
active devices list, all connected devices will be temporarily disconnected until
the procedure is complete. It may take up to two minutes to reconnect.

Review the active devices list

Press MeNu/
1.
in use.
2. Press or
/SeleCT.
MeNu
3. Press or
/SeleCT.
MeNu

Connect/Disconnect an active device

While in the active devices menu, you may connect or
disconnect your active device.
Press MeNu/
1.
in use.
2. Press or
/SeleCT.
MeNu
3. Press or
/SeleCT.
MeNu
4. Press or
then press
MeNu
5. Press or
(whichever is applicable), then press
/SeleCT to confirm. The handset displays
MeNu
Device connected/Device disconnected.
When your active device is connected, you will be prompted to select
Disconnect. When your active device is disconnected, you will be prompted
to select Connect.
on the handset when it is not
SeleCT
to highlight Bluetooth, then press
to highlight Active devices, then press
on the handset when it is not
SeleCT
to highlight Bluetooth, then press
to highlight Active devices, then press
to highlight a device when necessary,
/SeleCT.
to highlight Connect/Disconnect
20
Ans. system
Directory
Cal l log
Intercom
Bluetooth
BLUETOOTH
Download dir
Add cel lular
Add headset
Active devices
SELECT DEVICE
1 Headset A
2 Cel l Phone AC
Disconnect
Remove active