Table of Contents
Advertisement
Call waiting
When you subscribe to call waiting
service with your telephone service
provider, you hear an alert tone if there
is an incoming call while you are already
on a call.
• Press FLASH on the handset to put
your current call on hold and take the
new call.
• Press FLASH on the handset at any
time to switch back and forth
between calls.
Chain dialing
Use this feature to initiate a dialing
sequence from numbers stored in the
phonebook, caller ID log or redial list
while you are on a call.
Chain dialing can be useful if you wish
to access other numbers (such as bank
account numbers or access codes)
from the phonebook, caller ID log or
redial list.
To access a number from the
phonebook while on a call:
1. Press MENU twice to enter
phonebook.
2. Press
or
to scroll to the desired
entry.
3. Press SELECT to dial the displayed
number.
To access a number from the caller ID
log while on a call:
1. Press MENU.
2. Press
or
to highlight Caller ID log,
and then press SELECT.
3. Press
or
to scroll to the desired
entry.
4. Press SELECT to dial the displayed
number.
To access a number from the redial
list while on a call:
1. Press REDIAL to enter the redial list.
2. Press , , or REDIAL repeatedly to
browse to the desired entry.
3. Press SELECT to dial the displayed
number.
Find handset
This feature helps you find misplaced
handsets.
To start the paging tone:
• Press /FIND HANDSET on the
telephone base.
All idle handsets ring and their screens
display ** Paging **.
To stop the paging tone:
• Press FIND HANDSET at the
telephone base.
-OR-
, OFF,
• Press
or any dialing key
(0-9,
, or
) on a handset.
-OR-
• Place the handset in the telephone
base or charger.
NOTES
• Press MUTE to turn off the ringer of a
handset temporarily. Paging tone continues
on the other handset.
• Do not press and hold FIND HANDSET
for more than four seconds. It may lead
to handset deregistration. If the handset
displays To register HS... and ...see manual,
refer to the Frequently asked questions
section to register the handset back to the
telephone base.
12
Intercom
Use the intercom feature for conversations
between two handsets.
1. Press INT on your handset when not in
use.
• If you have only one handset, your
handset displays INT needs 2 HS.
• If you have two handsets, your
handset displays Calling HS X.
• If you have three or more handsets,
your handset displays
Intercom to. Use the dialing keys
to enter a destination handset. Your
handset displays Calling HS X.
The destination handset rings and its
screen displays HS X is calling.
2. To answer the intercom call, press
, INT or any dialing key (0-9,
or
) on the destination handset.
Both handsets now display Intercom.
3. To end the intercom call, press
OFF
or place the handset back in the
telephone base or charger. Both
handsets now display Intercom ended.
NOTES
• You can cancel the intercom call before it
is answered by pressing OFF or INT on the
originating handset.
• If the destination handset does not answer
the intercom call within 100 seconds, is on
a call or out of range, the originating handset
displays Unable to call and returns to idle
mode.
• Press OFF or MUTE on the destination
handset to temporarily silence the intercom
ringer.
• You can use four handsets on two pairs
of intercom calls. For example, when four
handsets are used on two pairs of intercom
calls, use the fifth handset for an outside call.
• If there is an incoming call while the
originating handset displays Calling HS X,
the intercom request will be stopped and the
screen displays Incoming call.
Answer an incoming call during an
intercom call
When you receive an outside call during
an intercom call, there is an alert tone.
• To answer the outside call, press
The intercom call ends automatically.
• To end the intercom call without
answering the outside call, press OFF.
The telephone continues to ring.
Call transfer using intercom
Use the intercom feature to transfer an
outside call to another system handset.
1. During a call, press INT.
• If you have two handsets, the
outside call is put on hold and your
,
handset displays Calling HS X.
,
• If you have three or more handsets,
your handset displays Intercom
to. Use the dialing keys to enter a
handset number. The outside call
is put on hold and your handset
displays Calling HS X.
The destination handset rings and its
screen displays HS X is calling.
2. To answer the intercom call on the
destination handset, press
, , INT or
any dialing key (0-9,
, or
outside call is still on hold and both
handsets now display Intercom. You can
now have a private conversation with the
destination handset.
NOTES
• To cancel the intercom call before it is
answered, press OFF,
or INT on your
handset.
• If the destination handset does not answer
within 100 seconds, is in use, on a call or
is out of range, the originating handset
displays Unable to call and then reconnects
to the outside call.
13
.
). The
Advertisement
Table of Contents
