What To Do If - Electrolux EBSL80A User Manual

30 electrolux
Installing the oven door
1.
Hold the oven door with a hand on each
side at an angle of approx. 45°. Put the
recesses on the bottom of the oven door
on the hinges on the oven. Let the door
move down as far as it will go.
2. Open the oven door as far as it will go.

What to do if...

Problem
The oven is not heating up
The oven light is not working
F11 appears in the time display
A fault code that is not listed
above appears in the time indi-
cation
Warning! Repairs to the appliance must
only be carried out by qualified service
engineers. Considerable danger to the
user may result from improper repairs.
In the case of misuse the visit by the
Customer Care Department technician
3.
4. Close the oven door.
Possible cause
The oven has not been switched
on
The required settings have not
been made
The fuse in the fuse box has
blown
The oven light bulb has blown
The meat probe has short
circuited or the meat probe's
plug is not firmly in position in the
socket
Electronic fault
A
Fold up the clamping levers (A) on the two
door hinges back to their initial position.
Switch oven on
Check settings
Check the fuses. If the fuses trip
several times, please call a quali-
fied electrician
Change the oven light bulb
Insert the meat probe plug into
the socket on the side wall of the
oven as far as it will go
Switch the appliance off and on
again via the house fuse or the
circuit breaker in the fuse box.
Contact the Customer Care De-
partment when the fault appears
again
or the repair may be chargeable, even
during the warranty period.
Remedy