Abit WB6 User Manual page 65

BIOS Setup
horizontal synchronization ports and write blanks to the video buffer.
DPMS: Initial display power management signaling.
Video Off In Suspend:
Two options are available: Yes or No. The default setting is Yes. This item determines the
manner in which the monitor is blanked.
Suspend Type:
Two options are available: Stop Grant and PwrOn Suspend. The default setting is Stop
Grant.
Modem Use IRQ:
You can specify the IRQ for modem use. Eight options are available: N/A , 3 , 4 , 5 ,
7 , 9 , 10 , 11. The default setting is N/A.
Suspend Mode/HDD Power Down:
These two items will be enable to change setting when item Power Management is set to
User Define, theses two item will also changes as table 3-6-3 below.
Table 3-6-3: Power Management Settings
Items
Disabled , 1 Min , 2 Min , 4 Min
Suspend Mode
, 8 Min , 12 Min , 20 Min , 30
Min , 40 Min , 1 Hour. The default
setting is Disabled.
HDD Power Down Disabled , 1 Min , 2 Min , 3 Min
, 4 Min , 5 Min , 6 Min , 7 Min
, 8 Min , 9 Hour , 10 Min , 11
Min , 12 Min , 13 Min , 14 Min ,
15 Min. The default setting is Disabled.
Soft-Off by PWR-BTTN:
Two options are available: Instant-Off and Delay 4 Sec.. The default setting is Instant-Off.
Power Management Settings
User Define Min Saving Max Saving
1 Hour
15 Min
3-33
1 Min
1 Min
User's Manual