Abit WB6 User Manual page 40

3-8
detected or is not correct.
User Define: This option lets the user select the voltage manually. You can change
values in the "Core Voltage" option lists by using the arrow up and down
keys.
Core Voltage:
This voltage depends on which processor you use. When the processor is installed, the
BIOS will automatically detect and provide the range that you can use to make the
adjustment.
Spread Spectrum:
Two options are available: Disabled,Enabled. The default setting is Disabled. For EMC
(Electro-Magnetic Compatibility Test) testing you may need to adjust these options for
optimal results, we do not recommend you change the default, except for special reasons.
Some values you select may cause system instability under some situations, please be
careful.
WB6
Chapter3