Abit WB6 User Manual page 17

Installing the Motherboard
module is keyed to the socket. You can refer to figure 2-6 for the details. This
insures the DIMM module will be plugged into the socket in one way only. Firmly
press the DIMM module into the DIMM socket, making certain the module is
completely seated in the DIMM socket.
Step 6. Once the DIMM module has been installed, the installation is complete and the
computer's cover can be replaced. Or you can continue to install other devices and
add-on cards that are mentioned in the following section.
When you install a DIMM module fully into the DIMM socket, the eject tab should be
locked into the DIMM module very firmly and fit into its indention on the both sides.
Step 3. Before
any electronic components,
make sure you first touch an
unpainted, grounded metal
object to discharge any
static electricity stored on
your clothing or body.
Step 4. Locate
computer's 168-pin memory
expansion DIMM socket.
Step 5. Insert the DIMM
module into the expansion
socket as shown in the
illustration. Note how the
Note
2-5
touching
your
User's Manual