Abit WB6 User Manual page 22

2-10
V-Bus Connector
JP 2, 3, 5, 6, 8
WB6
V-BUS: You can install the V-BUS adapter
to get video output capability. When you
install the V-BUS adapter, you can get two
video output capabilities. One is general
video output and the other is S-Video output
(Super-Video output). S-video output will
give you the best display quality on your TV
monitor. Of course, your TV monitor must
have the S-Video input jack for a S-Video
cable connection. This card supports both
PAL and NTSC systems for various
purposes.
These jumper settings are used in selecting
use of the built-in audio chip, AU8810
®
(optional) or using the Intel ICH internal
audio controller.
JP2, 3, 5, 6, 8 pin 1 and pin 2 shorted:
This setting will choose the use of the ICH
internal audio controller. (Default)
JP2, 3, 5, 6, 8 pin 2 and pin 3 shorted:
This setting will choose the use of the
AU8810 audio chip.
Chapter2