Abit WB6 User Manual page 38

3-6
ICS 9248-87 Frequency Selections
CPU (Ext. Clock)
66.8
100.30
133.60
68.33
70.0
83.3
107.0
112.0
124.0
133.60
137.33
138.0
140.0
155.0
143.96
150.0
Multiplier Factor:
You can choose the following multiplier factors:
x2 x2.5 x3
x6.5 x7 x7.5
The default setting is x4.5.
L2 Cache Latency:
Sixteen setting are available, Default, and 1 to 15. This item can let you adjust the
processor L2 cache speed, the larger the value, the faster the L2 cache will run. You
have to be aware that if you set the L2 cache speed too fast, it will cause the L2 cache
to fail. If the L2 cache fails it will cease to run until you reset the value, but the
processor and L1 cache will still function, just not as well. To make sure your L2
cache functions properly please choose an appropriate setting. The default setting is
Default.
Speed Error Hold:
The default setting is Enabled. If you change the setting to Disabled, when the CPU
speed setting is wrong, the system will not hold.
Normally, we do not recommend that you use the "User Define" option to setup CPU speed
and multiplier factors This option is for setup of future CPUs whose specifications are still
unknown. The specifications of all present CPUs are included in the default settings. Unless
you are very familiar with all CPU parameters, it is very easy to make mistakes when you
define the external clock and the multiplier factor by yourself.
WB6
SDRAM PCI
100.2 33.4
100.3 33.4
133.6 44.53
102.5 34.17
105.0 35.0
83.3 27.74
107.0 35.67
112.0 37.33
124.0 41.33
100.2 33.4
103.0 34.34
138.0 46.0
105.0 35.0
155.0 51.67
108.0 36.0
150.0 50.0
x3.5 x4 x4.5 x5
x8
Chapter3
x5.5 x6