Abit WB6 User Manual page 64

3-32
Power Management:
This item allows you to select the type (or degree) of power saving and is directly related to
the following modes:
1. Suspend Mode
2. HDD Power Down
There are three options for power management, three of which have fixed mode settings:
User Define
"User Define" defines the delay for accessing the power modes.
Disabled , 1 Min , 2 Min , 4 Min , 8 Min , 12 Min , 20
Suspend Mode:
Min , 30 Min , 40 Min , 1 Hour. The default setting is
Disabled.
HDD Power Down: Disabled , 1 Min , 2 Min , 3 Min , 4 Min , 5 Min , 6
Min , 7 Min , 8 Min , 9 Hour , 10 Min , 11 Min , 12
Min , 13 Min , 14 Min , 15 Min. The default setting is
Disabled.
Min Saving
When these two saving modes are enabled, the system is set up for minimum power
savings.
Suspend Mode = 1 Hour
HDD Power Down = 15 Min
Max Saving
When the two saving modes are enabled, the system is set up for maximum power
savings.
Suspend Mode = 1 Min
HDD Power Down = 1 Min
Video Off Method:
Three video off methods are available: "Blank Screen", "V/H SYNC + Blank" and "DPMS".
The default is " V/H SYNC + Blank ".
If this setting does not shut off the screen, select "Blank Screen". If your monitor and video
card support DMPS standard, select "DPMS".
Blank Screen: This option only writes blanks to the video buffer.
V/H SYNC + Blank: This selection will cause the system to turn off the vertical and
WB6
Chapter3